Opening Instructions
My products' lids are designed to be a tight fit, so they won't accidentally open in a backpack. If opened improperly, it may be difficult to separate the lid.
Do NOT try to open the lid by pulling straight up.
STEPS:
-
Place one hand on the base of the box, near a corner. Hold firmly for support.
-
Place your other hand’s thumb on a corner of the lid with your fingers gripping the long edge opposite.
-
Apply pressure to your thumb and lift, and open along a diagonal movement. Peeling the lid from the box body
Spacers
Your set may come with spacers and a wedge tool to remove them. They are intended to be a tight fit, so may require some force to remove. Future removals will quickly wear away at this grip strength
Your set may come with two Tag spacers. Previous versions of Neon Static tokens had different Tag counts. Choose which suits your set best.
Care
All products are printed in a matte PLA. To clean, soap and water are all that is required. Do not clean with acetone.
PLA has two main flaws; heat and UV light tolerance.
UV light is only a concern if exposed to extended periods (1 year+) of direct sunlight.
PLA starts to deform at ~60°C or 140°F. Do not leave in a hot car for extended periods of time, or in direct sunlight near a window that could lens light onto it.